Ricoh B003 Service Manual page 799

Tech Service Bulletin No. B003/B004/B006/B007 – 004 Reissue
Page 4 of 4
6.0 To configure the eCabinet:
1. Install the eCabinet, and make sure that it has the same IP address that you used when you
set the Capture Server IP address on the copier.
2. From a web browser, log in to the eCabinet as adminNOA.
3. On the toolbar, click Settings.
The Settings page appears.
4. Click Network and Device Configuration.
The Network and Device Configuration page appears.
5. Click Copiers.
The Copiers page appears.
6. Click New.
The Copiers - New Copier Information page appears.
7. Enter the Copier IP Address.
8. Click Merge eCabinet user list into user list on copier to keep any existing users that are on
the copier.
9. Click Save.
NOTE 1: The MFP requires its own device name to be resolved on the DNS server. If it cannot resolve its
own name, the FTP process to the eCabinet may be rejected.
NOTE 2: eCabinet Software version 2.1 or later is required.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA