Ricoh B003 Service Manual page 993

SERVICE PROGRAM MODE
SP5 Mode Number
5970* Debug Serial Output
⇒
5974*
5990
1
2
3
4
5
7
21
22
23
SP6-xxx: Peripherals
SP6 Mode Number
6006* DF Registration Adjustment
1* Side-to-side
2* Leading Edge (Thin Original)
3* Leading Edge (Duplex Front)
4* Leading Edge (Duplex Rear)
6007 ADF Input Check
1 Group 1
2 Group 2
6008 ADF Output Check
6009 DF Free Run
1 Duplex Mode
2 Stamp Mode
6010* DF Stamp Position
Adjustment
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
Cherry Server lite/ Switch
to Full
SMC Printout
All (Data List)
SP (Mode Data List)
User Program
Logging Data
Diagnosis Report
NIB Summary
Copier User Program
Scanner SP
Scanner User Program
CÓPIA NÃO CONTROLADA
Function and [Setting]
DFU
Switches writing between the ScanRouter V2 Lite
application provided and the optional full version.
0: Lite, 1: Full
NOTE: Cherry was the development name for
ScanRouter.
Prints all of the system parameter lists for the
item selected. ( 5.1.6) Input the number for the
item that you want to print, and then press
"Execute" on the touch panel.
Function and [Setting]
Adjusts the side-to-side and leading edge
registration for simplex and duplex original
feeding in ARDF mode. Press
[–3 ~ +3 / 0.0 / 0.1 mm step]
[–30 ~ +30 / 0.0 / 0.17 mm step]
[–42 ~ +42 / 0.0 / 0.12 mm step]
Displays the signals received from sensors and
switches of the ARDF.(
Switches on each electrical component (ARDF
motor, solenoid, etc.) of the ARDF for testing. (
5.1.5)
Press to switch on or
Performs a free run with the ARDF for duplex and
stamp testing. Input the number for the item you
want to check, and then press
1: To Start, 0: To cancel
This is a general free run controlled from the
copier. For more detailed free run modes, see the
ARDF manual.
Adjusts the horizontal position of the stamp on the
scanned originals.
[–7~+7 / 0 / 0.5 mm steps]
5-36
Rev. 02/2004
:
to toggle ±.
5.1.4)
to switch off.
to start.
SM