Jogger Unit Paper Positioning Mechanism - Ricoh B003 Service Manual

JOGGER UNIT PAPER POSITIONING MECHANISM

2.2 JOGGER UNIT PAPER POSITIONING MECHANISM
[C]
[E]
In staple mode, each sheet of copy paper is vertically and horizontally aligned
when it arrives in the jogger unit.
For the vertical paper alignment, the positioning roller solenoid [A] turns on shortly
after the entrance sensor [B] turns off and the positioning roller [C] pushes the copy
against the bottom of stack stopper [D].
For the horizontal paper alignment, the jogger fence [E] and the rear fence [F]
move to the waiting position, which is 10 mm away from the side of the paper. After
the vertical position is aligned, the jogger fence pushes the paper 20 mm against
the rear fence to align the paper horizontally. Then the jogger fence moves back to
the previous position.
The stapler is mounted on the rear fence.
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
[F]
[B]
13-8
CÓPIA NÃO CONTROLADA
[C]
[B]
[D]
[A]
A681D502.WMF
SM