Ricoh B003 Service Manual page 963

Tech Service Bulletin No. B003/B004/B006/B007 – 025 REISSUE
Scanner Support Bracket Installation
For SR760
1. Remove the Front Joint Bracket.
2. Install the 2 Spacers as shown at the
right and reinstall the Front Joint Bracket
(2 screws).
3. Remove the Rear Joint Bracket.
4. Remove the 2 screws (not shown) for the
Scanner Left Cover.
5. Install the Scanner Support Bracket (2
Screws) and then reinstall the Rear Joint
Bracket (2 screws) as shown in the
photograph below.
Scanner
Support Bracket
Rear Joint
Bracket
For SR720
1. Remove the Front Stand
2. Install the 2 Spacers as shown at the right.
3. Remove the rear stand.
4. Remove the 2 screws (not shown) from the
Scanner Left Cover.
5. Install the Support Plate (2 screws) and the
Rear Stand.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA
Spacers
Spacers
Page 3 of 6