Exposure Lamp - Ricoh B003 Service Manual

3.9.6 EXPOSURE LAMP

[A]
1. ARDF (☛ 3.9.1)
2. Exposure glass (☛ 3.9.2)
3. Operation panel [A] (! x2, " x1)
4. Slide 1st scanner [B] to the cutout to expose connector and screw.
5. Exposure lamp [C] (! x1, " x1)
NOTE: Never touch the glass surface of the exposure lamp with fingers. Slide
the exposure lamp toward the rear to disengage the tab on its base
from the hole below and then lift out.
SM
CÓPIA NÃO CONTROLADA
[D]
[B]
3-13
CÓPIA NÃO CONTROLADA
SCANNER UNIT
[C]
B004R105.WMF
B003/B004/B006/B007