Ricoh B003 Service Manual page 797

Tech Service Bulletin No. B003 – 004 Reissue
Page 2 of 4
2. Configurations and Necessary Hardware:
Mainframe
64MB Memory Option
NIB Option
Printer Option
Printer/Scanner Option
Fax Option
•
Basic: Copier/Document Server
•
Printer: Basic + Printer
•
Printer/Scanner: Basic + Printer/Scanner
•
Fax: Basic + Fax
3. Necessary Firmware Upgrades for Mainframes/Options produced before Oct '01:
The table below shows the necessary firmware versions for each configuration.
Although part of the Capture function may work with older versions, to make full use of the
function we strongly recommend upgrading to the following:
Firmware
Controller
LCDC
NCS(NIB)
NFA(Netfile)
Printer
Scanner
Fax Application
FCU
Delivery Module
∗ Note: When installing the individual Printer or FAX options, it is necessary to update the delivery
module in addition to the firmware. This is because the Printer/Scanner option firmware already
contains the new delivery module, which is automatically updated with the new firmware.
4.0 Necessary SP Settings:
SP Mode
4.1 SP5-836 -1 (Capture Function).
Enables/disables the Capture function.
When enabled, the settings screen for the function is displayed inside
System Settings.
0: Disabled (default)
4.2 SP5-836 -61 (Capture File Resend).
Enables/disables resending of previously captured files to eCabinet.
When enabled, if the client PC operator accesses a Captured file stored in eCabinet and sends it to the
A-C2, the machine will resend this document to the eCabinet. This is to provide an extra safeguard for
file backup. However if users wish to minimize network traffic and free up eCabinet memory, this function
can be disabled.
CÓPIA NÃO CONTROLADA
Basic
-
-
-
Version Basic
5.19.1
2.19
1.77
2.17
3.00 -
2.27 -
5.20 -
6.00.01 -
-
1: Enabled
CÓPIA NÃO CONTROLADA
Printer Printer/Scanner
-
-
- -
Printer Printer/Scanner
-
-
-
∗
FAX
-
-
FAX
-
-
-
-
∗
-
Continued...