Ricoh B003 Service Manual page 705

BIT SWITCHES
G3 Switch 0E - Not used (do not change the settings)
G3 Switch 0F
No FUNCTION
0 Alarm when an error occurred
in Phase C or later
0: Disabled
1: Enabled
1 Alarm when the handset is off-
hook at the end of
communication
0: Disabled
1: Enabled
2-7 Not used
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
If the customer wants to hear an alarm after each
error communication, change this bit to "1".
If the customer wants to hear an alarm if the
handset is off-hook at the end of fax communication,
change this bit to "1".
Do not change the settings.
3-48
CÓPIA NÃO CONTROLADA
SP No. 1-105-016
COMMENTS
SM