Ricoh B003 Service Manual page 894

SOFTWARE HISTORY
DESCRIPTION OF MODIFICATION
Continued from previous page
8. Even when the parameter settings changed by telnet are
not successfully written into the NVRAM, no error
message is indicated as a command line.
9. The software allows any name to be entered as the
computer name for NetBEUI.
10. When printing data with 0 byte by rcp, the NIB does not
respond to the waiting client PC.
11. No settings are valid with the install shell of RedHat Linux
Ver.7.1.
Change in Specification:
1. 2-byte code characters cannot be entered for a device
name.
Firmware modified to correct the following:
1. No error message is displayed in Netscape Navigator
even when an incorrect URL is input in the address bar.
2. Up to 32 characters can be input in the NetBEUI
configuration screen Comment box, even though
specification is 31 characters maximum.
3. The PS status cannot be displayed using the "stat"
command (lpq command for lpr).
4. If Trap is selected for the Access Type in the SNMP
Configuration screen during the snmpd process,
communication may be cut off.
5. The NIB does not respond to the "lprm –" command (root
directory) from a FreeBSD host computer.
6. If an undefined remote printer number is input in the
Netware configuration page, communication between the
NIB and Netware Server will be cut off.
Change in Specification:
1. Two or more print queues can be attached to a single
printer object (for further details, refer to TechMail
RC010430).
2. TCP Ports 11021 and 11023 (Design use) have been
closed.
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
4-16
CÓPIA NÃO CONTROLADA
Rev. 09/2002
FIRMWARE FIRMWARE
LEVEL VERSION
G0585921 E 1.77
G0585921 F 1.79
SM