Ricoh B003 Service Manual page 804

SOFTWARE HISTORY
4.6 SOFTWARE HISTORY
4.6.1 B003/B004/B006/B007 SOFTWARE MODIFICATION HISTORY
⇒
B003/B004/B006/B007
DESCRIPTION OF MODIFICATION
First mass production
Corrects the following:
Some buttons are disabled after the handset
is picked up and put back several times.
Some buttons are disabled after a job is
interrupted with off-hook (reset) and the
handset is put back.
It is possible to press to the On-hook button
while "no paper" is displayed.
The fax option malfunctions when several
quick dials are pressed in On-hook mode
(handset down).
The alert continues to be displayed even after
the handset is put back.
When trying to send stored files from the
Document Server, the ten-key pad is disabled
if the On-hook button is pressed twice while
still inside the Enter Password screen.
The response time of the ten-key pad has
been increased.
When documents are scanned for storage
(only) to the Document Server, the machine
does not prohibit changing the size of the
scanning area.
Manual reception is not possible while inside
the User Code Input screen.
The Stamp function is displayed in User Tool
Settings even though there is no Stamp option
installed.
SC990 occurs when printing a message
stored in the Information Box.
The fax option malfunctions when printing out
the G4 protocol dump list without the ISDN
option board installed.
The main power can be turned off even if the
handset is off the hook.
The TTI does not appear on any page when
sending documents with a cover sheet.
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
FAX OPTION SOFTWARE MODIFICATION HISTORY
Handset
Ten-key
response time
improved
Document
Server –
scanning area
(size)
Manual
reception
disabled
Option Stamp
displayed
Information Box
SP6-104: G4
Protocol Dump
List
Power off with
handset Off
hook
LAN Fax Driver
– No TTI
4-22
CÓPIA NÃO CONTROLADA
Title FIRMWARE
LEVEL
B3605590 E
B3605590 F
B3605590 G
Rev. 01/2002
FIRMWARE
VERSION
3.2.5
3.8.4
3.8.9
SM