Ricoh B003 Service Manual page 631

FAX UNIT
[A]
4. Remove the FCU harness [A] and slide out the FCU board [B] from the
machine.
5. Attach the four locking supports [D] to the CCUIF board [C]. Then attach the
CCUIF board to the FCU board [E] as shown.
6. Attach the flat cable [F] to the FCU board and the CCUIF board.
7. Attach the option G3 board [G] to the lower connector of the CCUIF board (2
screws).
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
[B]
B366I101.WMF
1-8
CÓPIA NÃO CONTROLADA
[F]
[D]
[C]
[G]
[E]
B366I109.WMF
SM