Ricoh B003 Service Manual page 949

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – 3502/4002/3502P/4502P
RICOH – AFICIO 1035/1045/1035P/1045P
SAVIN – 2535/2545/2535P/2545P
SUBJECT: BACKGROUND ON OPERATOR SIDE OF COPIES
SYMPTOM:
Toner adheres to the operator side of the development roller.
CAUSE:
The gap between the developer roller and the drum is too narrow on the operator side of the machine.
SOLUTION:
The specification of the doctor gap has been changed from 0. 40 ± 0.05mm to 0.38 ± 0.03mm.
OLD PART NO. NEW PART NO.
B0043100
NOTE: The new development roller assembly (B0043101) is only necessary for machines exhibiting the
above symptoms. All machines not exhibiting this symptom can use the original development
roller assembly (B0043100).
UNITS AFFECTED:
The Serial Number cut-in information is not available at time of this publication.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.

Copyright 2002 RICOH Corporation. All rights reserved.
CÓPIA NÃO CONTROLADA
TECHNICAL SERVICE BULLETIN
B003/B004/B006/B007 - 022
B0043101 Development Roller Assembly
CÓPIA NÃO CONTROLADA
DESCRIPTION
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
10/09/2002
REFERENCE
QTY INT PAGE ITEM
1 1 45 9