Ricoh B003 Service Manual page 980

SERVICE PROGRAM MODE
SP5 Mode Number
5970* Debug Serial Output
5974* Cherry Server lite/ Switch
to Full
5990 SMC Printout
1 All (Data List)
2 SP (Mode Data List)
3 User Program
4 Logging Data
5 Diagnosis Report
7 NIB Summary
21 Copier User Program
22 Scanner SP
23 Scanner User Program
SP6-xxx: Peripherals
SP6 Mode Number
6006* DF Registration Adjustment
1* Side-to-side
2* Leading Edge (Thin Original)
3* Leading Edge (Duplex Front)
4* Leading Edge (Duplex Rear)
6007 ADF Input Check
1 Group 1
2 Group 2
6008 ADF Output Check
6009 DF Free Run
1 Duplex Mode
2 Stamp Mode
6010* DF Stamp Position
Adjustment
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
Function and [Setting]
DFU
Switches writing between the Cherry lite
application provided and the optional full version.
0: Lite, 1: Full
Prints all of the system parameter lists for the
item selected. (
item that you want to print, and then press
"Execute" on the touch panel.
Function and [Setting]
Adjusts the side-to-side and leading edge
registration for simplex and duplex original
feeding in ARDF mode. Press
[–3 ~ +3 / 0.0 / 0.1 mm step]
[–30 ~ +30 / 0.0 / 0.17 mm step]
[–42 ~ +42 / 0.0 / 0.12 mm step]
Displays the signals received from sensors and
switches of the ARDF.(
Switches on each electrical component (ARDF
motor, solenoid, etc.) of the ARDF for testing. (
5.1.5)
Press
Performs a free run with the ARDF for duplex and
stamp testing. Input the number for the item you
want to check, and then press
1: To Start, 0: To cancel
This is a general free run controlled from the
copier. For more detailed free run modes, see the
ARDF manual.
Adjusts the horizontal position of the stamp on the
scanned originals.
[–7~+7 / 0 / 0.5 mm steps]
5-36
CÓPIA NÃO CONTROLADA
5.1.6) Input the number for the
5.1.4)
to switch on or to switch off.
Rev. 08/2003
:
to toggle ±.
to start.
SM