Ricoh B003 Service Manual page 904

Rev. 09/2002
⇒
B003/B004/B006/B007 CONTROLLER SOFTWARE MODIFICATION
DESCRIPTION OF MODIFICATION
The SP modes for HDD initialization (SP4911-
***) have been moved to SSP.
The SC error data (incl. logging data) from
SC-8XX was incorrect.
SC819 occurs when using Magazine Mode
without the optional memory installed.
When using an A4 2-page spread original to
print out to larger sizes (AMS) with hole-
punching selected, the machine displays
"Cannot staple", even though the Staple
function has not been selected.
When printing out with APS enabled and both
Punch and Staple selected, the display reads
"Cannot punch."
When entering a pm time using the 24-hour
format in Initial Settings, the machine inputs
the corresponding am time instead (e.g.
mistakenly inputs 8:00 instead of 20:00).
When entering 12:00, the machine inputs "0"
instead.
SP2103 has been moved from SSP to SP
mode.
Marks appear when printing out with 180
degree image rotation. These lines are
caused during the image processing stage.
When a jam occurs in Magazine Mode with a
combined-image original, the first image is not
saved and therefore cannot be recovered
(although all successive images are
successfully recovered).
Cannot enter SP mode after entering SSP
mode.
When a number key is pressed while the
machine is in Energy Saver Mode, the
machine comes back on line, however the
value of the number key pressed is input
(used).
Cannot change pm to am in the System
Settings clock setting screen in machines for
North America.
Recovery is not possible after the FCU
firmware download is interrupted. A function
has been added to make recovery possible
even after it is interrupted.
SM
CÓPIA NÃO CONTROLADA
FIRMWARE MODIFICATION HISTORY
HISTORY
Title
SP4911 moved
to SSP Mode
RSS logging
data incorrect
SC819
"Cannot staple"
is displayed
"Cannot punch"
is displayed
Time setting
error
SP2103 moved
to SP mode.
Marks on the
output with
image rotation
Portion of image
deleted during
jam recovery
Not possible to
enter SP from
SSP
Key input when
recovering from
Energy Saver
Mode
Cannot change
PM to AM
(clock)
FCU download
recovery not
possible
8-5
CÓPIA NÃO CONTROLADA
FIRMWARE FIRMWARE
LEVEL VERSION
B0045102 G 3.08.4
B003/B004/B006/B007