Ricoh B003 Service Manual page 1025

Firmware History for B003/B004/B006/B007
Version
3.8.9 LAN Fax Driver – No TTI The TTI does not appear on any page when sending
continued
3.8.13 LAN Fax Driver –
No count up.
3.8.14 Subst. reception file
cannot be printed out
5.20 "No paper" display
PC FAX transmission is
canceled
"No paper" LED
After the interrupt copy
mode
RTI (Own Fax name)
The LED keeps blinking
- PC FAX
User Tools key when the
SC code is displayed
Information Box
Journal report
5.20.1 Connection error with
ScanRouter Saver
(SC997)
LAN FAX using LPR port After several, successive requests are sent to the machine
5.20.3 Substitute Reception
(SC819)
Line Priority Setting
5.21.0 Security Global
Standards: ISO15408
CÓPIA NÃO CONTROLADA
Title
documents with a cover sheet.
When a document is printed out from a PC with the LAN Fax
driver, none of the counter values change.
(Refer to FCU Ver. 04.00.00).
When there is no paper in one of the trays (and the "No paper"
alert function has been selected), the alert will disappear after
the machine prints out one of the automatic reports.
If a fax Tx job is sent from a PC while the machine is in Energy
Saver Mode, the machine wakes up but the job is canceled.
If there is no paper in the tray when the machine goes to print
out an Auto Document, the "No paper" message is displayed
and the No Paper LED is lit. However, the LED remains lit after
pressing the OK button on the "No paper" display.
Fax transmission settings are cleared after using Interrupt
Copy.
The machine allows lower-case letters to be input for the RTI,
even though specification prohibits this.
When the page data for a PC FAX job is exactly 64 Kbytes, the
data-in LED does not stop blinking and the page data is not
stored in memory .
Even when an SC code is displayed, the user is able to use the
Facsimile Features menu in User Tools.
The Fax freezes if an Information Box file is printed out while
the door is open.
With Print per User Code for Journal, user names can only be
printed out up to a maximum of 16 characters (spec. is max. 20
characters).
The Fax option is stopped when a network error occurs while
transferring received messages to the ScanRouter saver.
using the LAN FAX driver via the LPR port, the machine stops
transferring.
SC819 is displayed following a substitute reception job
received while in Energy Saver Mode. The condition can be
cleared by power Off/On, and the substitute reception file is not
erased.
Note: This only occurs with FAX application version 5.20.1.
Even after setting the line to PABX, it does not appear in the
Line Priority Settings Menu.
To conform to the ISO15408 Security Global Standards, when
attempting to print documents from the Personal Box, an error
message will be displayed if the user inputs an incorrect
password 3 times.
Note: This condition can be cleared by power Off/On.
CÓPIA NÃO CONTROLADA
Symptom Corrected
Page 13 of 15