Stapler - Ricoh B003 Service Manual

STAPLER

2.4 STAPLER
The stapler is mounted on the rear fence. When the rear fence moves, the stapler
moves.
The staple hammer is driven by the stapler hammer motor [A].
When excessive load is applied to the staple hammer motor, the copier detects a
staple jam. When a staple jam has occurred, the jammed staple is inside the staple
cartridge [B]. Therefore, the jammed staple can be removed easily after pulling out
the staple cartridge.
If there is no staple cartridge in the stapler unit or no staples in the staple cartridge,
staple end is indicated on the operation panel.
This machine has only one stapling position.
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
13-10
CÓPIA NÃO CONTROLADA
[A]
A681D504.WMF
[B]
SM