Ricoh B003 Service Manual page 971

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – 3502/4002/3502P/4502P
RICOH – AFICIO 1035/1045/1035P/1045P
SAVIN – 2535/2545/2535P/2545P
SUBJECT: FIRMWARE MODIFICATION - PRINTER
GENERAL:
The latest firmware version can be downloaded at the Technology Solution Center FTP Site
http://tsc.ricohcorp.com. Be sure to check the README file for important notes and explanations.
NOTE: Refer to Facts Line Bulletin # FL002 and Publication Bulletin #023 for more information about the
FTP Internet Web Site and EPROM/Flash Card Exchange program.
B003/B004/B006/B007 PRINTER FIRMWARE MODIFICATION
DESCRIPTION OF MODIFICATION
Firmware modified to correct the following:
1. Line spacing command "lochEsc&l#D"loch
causes incorrect output.
2. Euro currency symbol is not printed when
using the PS driver.
3. Slow Printing from AutoCAD
4. Bold may not work on some TrueType fonts.
5. With some bolded fonts, text characters appear
too thick, removing the fine detail.
6. When using bold fonts, short lines may appear
around text characters.
7. PJL Echo does not respond correctly.
8. PS print file is printed as text.
9. CAD print files:
- Increased the number of available pen
selections from 8 to 256 when BitSw #3-3 is
ON.
- Modified so that the "null" character is ignored
when it is included in HP/GL2 data to increase
speed.
- The status flag for the bold selection
command is refreshed when it is selected for
HP/GL2 data.
   
Copyright 2003 RICOH Corporation. All rights reserved.
CÓPIA NÃO CONTROLADA
TECHNICAL SERVICE BULLETIN
B003/B004/B006/B007 – 028
CÓPIA NÃO CONTROLADA
FIRMWARE SERIAL
LEVEL NUMBER
B3615902 J Oct. '02
production
02/12/2003
FIRMWARE
VERSION
Ver. 3.09
...continued
Continued...