1.9.2 INSTALLATION PROCEDURE
!
CAUTION
Switch off the main machine and unplug its power cord. If the Two-Tray
Finisher is installed, disconnect it and pull it away from the machine.
(☛ 1.8)
1. Unpack the punch unit and remove all tapes and shipping retainers.
2. Open the front door and remove the rear cover [A] (! x4).
3. Remove the bracket [B] (! x2) and paper guide [C] (! x 1).
SM
CÓPIA NÃO CONTROLADA
[A]
B377I102.WMF
[C]
1-41
CÓPIA NÃO CONTROLADA
PUNCH UNIT INSTALLATION
B377I103.WMF
B003/B004/B006/B007
[B]