Ricoh B003 Service Manual page 77

[A]
8. Install two trays [A] (! x1 each).
9. Connect the finisher cable [B] to the main machine below the right rear handle.
10. Turn on the main switch and check the finisher operation.
NOTE: When moving the finisher to a new location, if you wish to put the finisher
back in the original carton, change the DIP switch settings. See DIP
Switches in the finisher service manual.
SM
CÓPIA NÃO CONTROLADA
TWO-TRAY FINISHER INSTALLATION
B352I103.WMF
[B]
1-39
CÓPIA NÃO CONTROLADA
B352I106.WMF
B003/B004/B006/B007