Figure 27-2. ZoneRanger SNMP Proxy with GVI
The messaging flow for an SNMP proxy request using GVI is illustrated in the following figure.
Note the following from this example:
•
The management application requests that a UDP datagram containing the SNMP
GetRequest message be sent to the address of the target device (10.4.1.2) [1].
•
The routing table in the management application server is preconfigured to route traffic
destined for the 10.4.1.2 address to the GVI driver.
•
The GVI driver forwards the request to the Ranger Gateway [2], which checks the Proxy
Access Control configuration to verify that the request should be allowed and to identify
the proxy service to which the request should be forwarded (i.e. SNMP Proxy).
ZoneRanger 5.5 User's Guide
81