Tavve zoneranger User Manual page 242

Usage Guidelines
The access control users command will immediately enter a configuration submode. Unless
cancel is issued, the ZoneRanger software will restart when the users information is saved.
Once you are in the users configuration submode, the following configuration commands are
available:
user user_name password [ administrator | operator ]
no user user_name password [ administrator | operator ]
Example
This example shows how to add users:
access-control-server-group
To add a group of access control servers to be used for TACACS+ and RADIUS authentication to
ZoneRanger managed devices or the ZoneRanger itself. To remove a group, use the no form of this
command
access-control-server-group group_name
no access-control-server-group group_name
Syntax Description
group_name
ZoneRanger 5.5 User's Guide
•
cancel - Exit this mode without saving any changes
•
exit – exit users mode (saving changes)
•
no – remove or use default settings
•
user – user to configure
user
user_name
password
administrator
operator
no
zr# access control users
zr(user)# user topdog secretpassword administrator
zr(user)#exit
.
Name of the access group.
User to configure.
User name to configure
Password for user. Must be at least 5 characters
User is administrator level
User is operator level
Deletes this condition
242