Tavve zoneranger User Manual page 174

Parameter
Target
OID
Disallow Get
Disallow Set
Configuring the ZoneRanger SNMP Agent
ZoneRanger provides information via its read-only SNMP agent. The Configuration > SNMP
page Agent tab can be used to configure specific SNMP agent information.
Figure 34-60. Configuration > SNMP page Agent tab
The Community String defines the community string to respond to when using SNMPv1 or
SNMPv2c. The Users list defines which users the ZoneRanger agent will respond to when
using SNMPv3. The users are defined on the Configuration > SNMP page Users tab. To
disable the SNMP agent on the ZoneRanger, uncheck all three versions next to Agent
Responds To.
Configuring the SNMP Proxy Cache
ZoneRanger has the capability to proxy SNMP requests through the Ranger Gateway to a
ZoneRanger managed device and return the response. The Configuration > SNMP page Proxy
Cache tab allows for the configuration of the SNMP caching of those responses as well as the
logging of SNMP proxy requests.
ZoneRanger 5.5 User's Guide
Description
Target IP address of the SNMP request.
Target may be an address pattern or Node
Group.
SNMP OID to disallowed.
matches the disallowed OID if the requested
OID starts with the disallowed OID.
Disallowed SNMP Get Requests
Disallowed SNMP Set Requests
The requested OID
174