Tavve zoneranger User Manual page 213

Setting
Passcode
Mail Server Address
Messaging Port
HTTP Port Enabled
HTTP Port
Gateway Settings...Access Control
The Gateway Settings...Access Control window provides the configuration information for the
Ranger Gateway handling of TACACS+ and RADIUS requests.
ZoneRanger 5.5 User's Guide
Description
Default passcode used when joining to
ZoneRangers if none is specified during
the join request, or if the join was
requested from the ZoneRanger web
interface
Hostname or IP address of the mail
server the Ranger Gateway should use
(e.g. for e-mail notifications related
to root cause)
Destination port used for communications
between ZoneRangers and Ranger Gateways.
All joined ZoneRangers and Ranger
Gateways must use the same port.
When checked, the Ranger Gateway will
listen for HTTP requests on the
configured HTTP Port, and will return a
web page listing all of the currently
joined ZoneRangers, along with links to
their web interfaces via proxy through
the Ranger Gateway.
Ranger Gateway HTTP port which can be
used to access the web interface of
joined ZoneRangers.
213