Tavve zoneranger User Manual page 303

deleteRoute
deleteRoute zoneranger network_addr network_mask gateway_addr
zoneranger
network_addr
network_mask
gateway_addr
metric
deleteRoute
deviceGroup
deviceGroup subcommand [ arguments ]
deviceGroup
portMap rules.
supports different parameters and options. Most deviceGroup subcommands provide the option to
operate directly on the active device group table of a running Ranger Gateway in real time, or to
work offline with text files, which can be inspected and edited using a text editor, then installed on
the Ranger Gateway when required modifications have been completed.
As a convenience, a device group called ZoneRanger is available which includes any IP addresses
that map to a joined ZoneRanger based on the proxyMap configuration.
subcommand
•
copy [–in input_file ] [-out output_file ]
•
add [–in input_file ] [-out output_file ] group-name address [ address ...]
•
remove [–in input_file ] [-out output_file ] group-name address
[ address ...]
•
merge [–in input_file ] [-out output_file ] merge_file
•
list [–in input_file ] [ group-name ] [ address ]
•
clear [-f]
•
config [ item [ value ]]
•
test [ address ]
deviceGroup copy [–in input_file ] [-out output_file ]
-in
-out
deviceGroup copy
•
•
•
ZoneRanger 5.5 User's Guide
specifies the name of the ZoneRanger from which to remove the route
specifies the network IP address of the route to be removed
specifies the network mask of the route
specifies the gateway IP address for this route
specifies the optional metric for this route
removes an entry from the ZoneRanger routing table.
creates named groups of devices which can be used in the creation of proxyMap and
command is organized as a set of subcommands, each of which
deviceGroup
can be one of the following:
indicates the name of the input file containing device group information
indicates the name of the output file to write device group information
can be used for the following:
To copy the content of the active device group table to a specified text file.
To copy the content of a specified text file to the active device group table.
To copy the content of one specified text file to another.
303