Tavve zoneranger User Manual page 214

Figure 35-5. Gateway Settings .. Access Control Window
The Access Control window can be used to configure whether or not TACACS+ and RADIUS
client requests from ZoneRanger managed devices, will be presented to the TACACS+/RADIUS
server with the source address of the Ranger Gateway or the source address of the ZoneRanger
managed device.
When the Spoof TACACS+ Client Requests checkbox is enabled, the source address in TACACS+
requests sent from the Ranger Gateway to the TACACS+ server will be the source address of the
original sending device managed by the ZoneRanger. If the checkbox is disabled, the source address
in these requests will be the address of the Ranger Gateway. The Spoof RADIUS Client Requests
checkbox governs the source address in RADIUS requests in a similar manner.
Gateway Settings...Device Groups
The Gateway Settings...Device Groups window provides the configuration information for the
creation and management of Device Groups. A device group is a named set of IP addresses, or
address patterns, used in the configuration of the Proxy Access Control and Proxy Map services.
Device groups are described in detail in Chapter 7.
ZoneRanger 5.5 User's Guide 214