Tavve zoneranger User Manual page 322

The
portMap add
•
To add a new portMap table rule.
•
To modify an existing portMap table rule.
The
src-address , dest-address ,
the rule to be added or modified. If the input configuration already contains a rule with the matching
src-address
added.
The
portMap add
text file. If no input file is specified, the active portMap table is used. If no output file is specified,
the resulting configuration is automatically copied to the active portMap table. If an output file is
specified, the resulting configuration is written to the specified file and the active portMap table is
unchanged.
portMap remove [-in input-file ] [-out output-file ] < src-address >
indicates the name of the input file containing portMap information
-in
indicates the name of the output file to write portMap information
-out
src-address
dest-address
port-config-name
The
portMap remove
portMap table, or from an offline file.
The
src-address
rule to be removed. If no
match the specified
value are specified, only the rules that contain the matching values will be removed. If no
name
matching rules are found, the input configuration will be unchanged.
The
portConfig remove
specified text file. If no input file is specified, the active portMap table is used. If no output file is
specified, the resulting configuration is automatically copied to the active portMap table.
output file is specified the resulting configuration is written to the specified file and the active
portMap table is unchanged.
portMap merge [-in input-file ] [-out output-file ] < merge-file >
indicates the name of the input file containing device group information
-in
indicates the name of the output file to write device group information
-out
merge-file specifies the name of a file that contains a set of entries to be merged to the input
configuration.
portMap merge
•
•
ZoneRanger 5.5 User's Guide
subcommand can be used for the following purposes:
and the existing rule will be replaced. Otherwise the new rule is
dest-address ,
subcommand can read input from the active portMap table, or from a specified
[< dest-address > [< port-config-name >]]
indicates the source IP address of the incoming request.
indicates the destination IP address of the managed device
name of the Port Config rule
subcommand can be used to remove one or more rules from the active
, and optional
dest-address ,
dest-address ,
port-config-name
subcommand can read input from the active portMap table, or from a
can be used for the following:
To add new portMap table rules.
To modify existing portMap table rules.
and
port-config-name
and
port-config-name
or
port-configname
will be removed. If a
dest-address
parameters specify the content of
parameters specify the
values are specified, all rules that
and
port-config-
If an
322