Tavve zoneranger User Manual page 326

The
proxyMap
configuration, by querying the databases of joined ZoneRangers to identify the devices they are
managing.
If no output file is specified, the generated configuration is automatically copied to the active proxy
map. Otherwise, the generated configuration is written to the specified file and the active proxy map
is unchanged.
Note: The
proxyMap generate
Ranger Gateway and its joined ZoneRangers cannot identify the address mappings. However, it
might still be helpful to auto-generate to a file, manually edit the resulting file to add in the
necessary
zr-address
proxyMap copy [–in input_file ] [–out output_file ]
indicates the name of the input file containing proxy map information
-in
indicates the name of the output file to write proxy map information
-out
The
proxyMapTool copy
•
Copy the content of the active proxy map to a specified text file.
•
Copy the content of a specified text file to the active proxy map.
•
Copy the content of one specified text file to another.
If no input file is specified, the active proxy map is used as the source of the copy. If no output file
is specified, the input configuration is automatically copied to the active proxy map. If an output file
is specified, the input configuration is written to the specified file and the active proxy map is
unchanged.
Note: The
copy
text format. See ProxyMap File Formats for examples.
proxyMap add [–in input_file ] [–out output_file ] rg-address
indicates the name of the input file containing proxy map information
-in
indicates the name of the output file to write proxy map information
-out
-weight
rg-address
zoneranger
zr-address
translation for this request
weight
The
proxyMap add
•
Add a new proxy map entry.
•
Modify an existing proxy map entry.
The
rg-address , zoneranger
entry to be added or modified. If the input configuration already contains an entry with the matching
rg-address
ZoneRanger 5.5 User's Guide
subcommand can automatically generate a basic proxy map
generate
subcommand is not as useful when NAT is in effect, because the
values, and then install the resulting file.
subcommand can be used to:
subcommand always outputs XML. The input format can be XML, or a simple
[ zr-address ] [-weight weight ]
indicates the weight of a ZoneRanger relative to other ZoneRangers
specifies the IP address of the incoming request to the Ranger Gateway
specifies the ZoneRanger to which to send the request
specifies the IP address to use on the ZoneRanger in the case of address
specifies the weight of this ZoneRanger. This must be a positive integer.
subcommand can be used to:
, and optional
and , the existing entry is replaced. Otherwise, the new entry is added.
zoneranger
parameters specify the content of the
zr-address
zoneranger
326