Tavve zoneranger User Manual page 307

</device-group-list>
The deviceGroup commands that read configurations (i.e. copy, add, remove, merge, list) are
able to read configuration input in the XML format, and also in a simplified text format. An
example of this format, corresponding to the XML example above, is as follows:
discovery
discovery zoneranger [–start | –status]
zoneranger
-
start
-
status
discovery
currently running discovery service.
downloadFile
downloadFile zoneranger [-list | filename ]
zoneranger
displays the list of possible files which may be retrieved from the specified ZoneRanger.
-list
filename
downloadFile
information:
•
SNMP traps
•
Syslog messages
•
Discovery results
•
Patch application results
•
General system operation
downloadTftpFile
downloadTftpFile zoneranger filename
zoneranger
filename specifies the name of the file to retrieve.
ZoneRanger 5.5 User's Guide
<address value="10.2.2.5"/>
</device-group>
group1 10.1.2.*
group1 10.10.2.*
group2 10.2.2.1
group2 10.2.2.2
group2 10.2.2.5
specifies the name of the ZoneRanger to begin discovery
starts the discovery service on the specified ZoneRanger
displays the status of the discovery service on the specified ZoneRanger
starts the discovery service on the specified ZoneRanger, or gives the status of a
specifies the name of the ZoneRanger
specifies the name of the file as it appears in the
can be used to download log files from the ZoneRanger containing the following
specifies the name of the ZoneRanger from which to retrieve file
option.
–list
307