Tavve zoneranger User Manual page 296

config_item
gateway_status_trap_dest_address
generic_forward_log
http_forward_port
http_forward_port_enabled
icmp_proxy_log
icmp_proxy_timeout
mail_server
messaging_port
netflow_forward_log
ntp_proxy_log
ntp_proxy_spoof
radius_proxy_log
radius_proxy_spoof
sflow_forward_log
snmp_proxy_client_address
ZoneRanger 5.5 User's Guide
description
Destination hostname or IP
address to which Ranger Gateway
status traps are sent
Level of logging for generic UDP
forwarding - values: none,
short, full
Ranger Gateway HTTP port which
can be used to access the web
interface of joined ZoneRangers.
Whether or not the
http_forward_port should be
available on the Ranger
Gateway
Level of logging for ICMP proxy
- values: none, short, full
Number of seconds to wait for a
response from the ZoneRanger for
each ICMP request
Hostname or IP address of the
mail server the Ranger Gateway
should use to send
emails
Port used for communications
between ZoneRangers and Ranger
Gateways. All joined
ZoneRangers and Ranger Gateways
and redundant ZoneRangers must
use the same port.
Level of logging for NetFlow
forwarding - values: none,
short, full
Level of logging for NTP Proxy -
values: none, short, full
Whether or not the source
address in the NTP client
requests is the source address
of the original sending device
managed by the ZoneRanger or the
address of the Ranger Gateway.
Level of logging for RADIUS
proxy - values: none, short,
full
Whether or not the source
address in the RADIUS client
requests is the source address
of the original sending device
managed by the ZoneRanger or the
address of the Ranger Gateway.
Level of logging for sFlow
forwarding - values: none,
short, full
Address pattern or device group
which lists the set of client
addresses from which to accept
SNMP proxy requests using the
Community String Convention
method.
root cause
296