Tavve zoneranger User Manual page 183

Figure 34-68: Configuration > Traffic page Received Traffic tab
The Enable Threshold Monitoring checkboxes are used to configure whether or not the
ZoneRanger should monitor thresholds by traffic type or by IP address. When enabled by
traffic type, the total traffic received by traffic type will be compared with the configured
threshold during the measurement interval. When enabled by IP address, the traffic received
from each IP address will be compared with the configured threshold for each traffic type
during the measurement interval.
If threshold monitoring is enabled and a threshold is exceeded, a ZoneRanger audit message
will be displayed as well as a message will be logged in the ZoneRanger System log. If the
Send a trap when a threshold is exceeded checkbox is checked, the ZoneRanger will also
generate an SNMP trap containing information about the exceeded threshold.
Configuring Proxied Traffic
The Configuration > Traffic page Proxied Traffic tab is used to enable threshold monitoring
by traffic type or IP address, set threshold values by traffic type and IP address, and whether or
not to send an SNMP trap if a configured threshold is exceeded for traffic proxied by the
ZoneRanger.
ZoneRanger 5.5 User's Guide 183