Tavve zoneranger User Manual page 334

Item
log_level
port
Encrypted
If no item or value is specified, the values of all configuration items are listed. If an item is
specified with no value, the current value of the specified configuration item is displayed. If an
item and a value are specified, the value of the specific configuration item is set to the specified
value.
servicedump
servicedump zoneranger [-i[nfo] | -s[top] –t[arget] location name from
servicedump –rg
creates a Ranger Gateway service dump
-rg
servicedump zoneranger [-i[nfo] | -s[top] –t[arget] location name from
zoneranger
-i[nfo]
-s[top]
-t[arget]
servicedump
ZoneRanger system problems.
Support.
File creation using
command window that spawned a service dump, or if the shell or command window is otherwise
stopped, file creation continues.
setPasscode
setPasscode passcode
passcode
setPasscode
to ZoneRangers.
shutdownSystem
shutdownSystem zoneranger -restart | -reboot | -shutdown
zoneranger
-restart
-reboot
ZoneRanger 5.5 User's Guide
Value
Determines the level of logging for the RGVI
service – values: none, short , full.
is none.
Port which the RGVI services is listening for
OpenVPN clients.
Whether or not communications between the
OpenVPN client and the Ranger Gateway is
encrypted.
to ]
to ]
specifies the name of the zoneranger to perform the service dump
reports the status of the service dump.
stops the service dump.
performs a targeted service dump.
generates a file containing diagnostic information about Ranger Gateway or
servicedump
continues across Ranger Gateway restarts. If you kill the shell or
servicedump
indicates the default passcode the Ranger Gateway should use.
changes the passcode of the Ranger Gateway. The
specifies the name of the ZoneRanger
indicates that the ZoneRanger application software be restarted.
indicates that the ZoneRanger be rebooted.
Default is 1194
Default is true.
is useful when working with Tavve Technical
passcode
Default
is used when joining
334