Tavve zoneranger User Manual page 187

When using Insert SNMP Trap, the SNMPv1 test trap with an enterprise of
tscZRTestTrap
and type of is generated. If the Trap Forwarding activity
1.3.6.1.4.1.2668.1.1.16 91
indicator flashes, this indicates that the inserted trap was forwarded to a Ranger Gateway.
When using Insert UDP Packet, a UDP datagram with the payload containing the string
, followed by a count of the number of test datagrams sent since you
ZoneRanger UDP test
most recently logged into ZoneRanger is generated. If the UDP Forwarding activity indicator
flashes, this indicates that an inserted UDP datagram was forwarded to a Ranger Gateway.
When using Insert Syslog message, a Syslog INFO message with a program name of
and the string as the message text is generated. The test message
ZoneRanger Syslog test
is followed by a count of the number of test messages sent since you most recently logged into
ZoneRanger. If the Syslog Forwarding activity indicator flashes, this indicates that an inserted
Syslog message was forwarded to a Ranger Gateway.
Ping/Scan
ZoneRanger provides a diagnostic tool to ping IP addresses and scan TCP ports and SNMP
interfaces via the Diagnostics > Ping/Scan page.
Figure 34-74. Diagnostics > Ping/Scan page ICMP Ping tab
The ICMP Ping diagnostic enables you to ping an address and view the results. The address
does not have to be a ZoneRanger managed device. By default, the ICMP ping diagnostic
reports the number of transmitted ICMP echo requests, the number of received echo replies, and
the total elapsed time of the ping.
Using the TCP port scan diagnostic
The TCP Port Scan diagnostic scans the specified address for open TCP ports and displays the
results.
ZoneRanger 5.5 User's Guide 187