Tavve zoneranger User Manual page 331

•
Otherwise, the first
value is selected.
RangerGateway
RangerGateway
RangerGateway
removeTftpFile
removeTftpFile zoneranger filename
zoneranger
filename specifies the file to remove.
removeTftpFile
rgBackup
rgBackup [ -d directory ] backup | restore filename [ -nostart ]
directory
filename specifies the backup file to restore.
creates or restores a backup of the Ranger Gateway configuration. If a directory is not
rgBackup
specified, the <install_dir>/backup directory will be used. Only a backup of the same Ranger
Gateway version may be restored. The -nostart option causes the Ranger Gateway to NOT restart
after the backup is restored.
rgvi
rgvi subcommand [arguments]
manages the allowable clients and routes for the remote gateway virtual interface to provide
rgvi
communications with OpenVPN clients.
each of which supports different parameters and options.
subcommand
•
enable
•
disable
•
status
•
add-client < client-address >
•
remove-client < client-address >
•
clear-clients [-f]
•
list-clients
•
use-gvi-routes < client-address >
•
add-route < client-address > < subnet> [< subnet> ...]
•
remove-route < client-address > < subnet> [ subnet> ...]
•
list-routes [< client-address >]
•
clear-routes < client-address > [-f]
•
config [ item [ value ]]
rgvi enable
ZoneRanger 5.5 User's Guide
route-list
starts the Ranger Gateway Viewer GUI.
specifies the name of the zoneranger to remove the file
removes a file from the ZoneRanger TFTP directory.
specifies the name of the directory to use for backups
can be one of the following:
element with a matching address pattern
command is organized as a set of subcommands,
rgvi
rg-address
331