Tavve zoneranger User Manual page 172

Figure 34-57. Configuration > SNMP page Access Test tab
The Show Accessible and Show Disabled check boxes control which nodes are listed as
testable. The Show Accessible check box includes all the SNMP accessible nodes. The Show
Disabled check box includes all the disabled targets under the Disallowed tab.
You can use the Community Strings and Users tables to specify community strings and users.
The Defaults button will initialize the list of community strings or users with those already
configured for other nodes.
After the test finishes, you can click Update Configuration to automatically add configuration
rules to the Manager and User tables, based on successful test results.
Configuring the SNMP Preferred Address
Some devices having multiple IP interfaces might be configured so that only one IP interface
responds to SNMP requests. You can use the Configuration > SNMP page Preferred Address
tab to configure the IP address that the ZoneRanger uses when sending SNMP requests on
behalf of services such as SNMP polling and SNMP proxy.
Figure 34-58. Configuration > SNMP page Preferred Address tab
When SNMP accessible nodes are first discovered, a default preferred SNMP interface is
chosen for each node. To modify the preferred SNMP interface, select a node in the Nodes list
and use the appropriate radio button to select the IP address.
ZoneRanger 5.5 User's Guide 172