Tavve zoneranger User Manual page 147

Figure 34-34. Configuration > Forwarding page Trap Filters tab
ZoneRanger provides a set of pre-defined trap filters. Using the Add Custom Trap Filter
button, additional trap filters may be created. Trap filters are configured with a set of conditions
which either all conditions must be true or at least one condition must be true. Trap filters may
use the following conditions:
Condition
Trap
Enterprise OID
Generic Trap
Specific Trap
Trap OID
Variable Binding
Agent
Version
Community
Trap Filter
Configuring syslog options
The Configuration > Forwarding page Syslog tab provides the ability to modify the strictness
of syslog forwarding.
ZoneRanger 5.5 User's Guide
Description
Previously defined trap
SNMPv1 Enterprise OID of a trap or an
OID prefix
SNMPv1 Generic Type of a trap
SNMPv1 Specific Type of a trap
SNMPv2c Trap OID of a trap or an OID
prefix
Variable binding value of a trap,
defined by an index starting at 1.
'*' may be used at the beginning and/or
end of the value to denote a wildcard
match
SNMPv1 agent of a trap (IP address or IP
address range) Multiple agents can be
listed using commas between IP
addresses and may be an address pattern.
SNMP version of the trap
SNMP community string, or user name for
SNMPv3
previously defined trap filter
An
147