Tavve zoneranger User Manual page 328

If a file containing a set of address pattern entries is merged onto a proxy map configuration, the
merged entries will appear in the resulting configuration in the same order they appear in the merge
file.
The
proxyMap merge
text file. If no input file is specified, the active proxy map is used. If no output file is specified, the
resulting configuration is automatically copied to the active proxy map. If an output file is specified,
the resulting configuration is written to the specified file and the active proxy map is unchanged.
proxyMap list [–in input_file ] [ rg-address ]
indicates the name of the input file containing proxy map information
-in
indicates the name of the output file to write proxy map information
-out
rg-address
The
proxyMap list
•
List all entries in a configuration.
•
List the entries in a configuration that match a given
If no
rg-address
only those entries that match the specified
Note: The resulting list might include entries with a specific
matches the input value, as well as entries where the
pattern. The
specified text file. If no input file is specified, the active proxy map is used. Otherwise, the specified
input file is used.
proxyMap clear [-f]
The
proxyMap clear
map. If the -f option is specified, the user is not prompted for confirmation.
When the
proxyMap clear
active proxy map should be cleared. If the response is
map is cleared. Otherwise, the active proxy map is not changed.
proxyMap config [[ item [ value ]]
The configuration items associated with the proxy map service are:
Item
log_level
resolve_host_names
allow_unconfigured_routes
balance_zoneranger_selection
ZoneRanger 5.5 User's Guide
subcommand can read input from the active proxy map, or from a specified
specifies the IP address of the incoming request to the Ranger Gateway
subcommand can be used to:
value is specified, all entries in the input configuration are listed. Otherwise,
subcommand can read input from the active proxy map, or from a
proxyMap list
subcommand is used to clear (remove all entries from) the active proxy
subcommand is executed, the user is prompted to confirm that the
Value
Determines the level of logging for the proxy map service
– values: none, short , full. Default is none.
Specifies whether rg-address values should be resolved
before searching for matching entries in the active proxy
map. The default value is true.
Specifies whether the proxy map service should simply
select the best available ZoneRanger to relay requests in
the absence of a matching entry in the active proxy map.
The default value is true.
Specifies whether the proxy map service should attempt to
balance proxy transaction load across the available
ZoneRangers. The default value is true.
rg-address
are listed.
rg-address
rg-address
rg-address
or (case is ignored), the active proxy
y yes
.
value that exactly
value is a matching address
328