Tavve zoneranger User Manual page 276

Example
This example shows how to SNMP walk the system table:
system
Change the system configuration on the ZoneRanger.
system [ dns | host | port | property | reboot | restart | shutdown ]
Syntax Description
dns
host
port
property
reboot
restart
shutdown
Usage Guidelines
Each of the system commands will take effect immediately when executed. The dns clauses
are positional significant. Thus each dns clause takes an optional index position which deter-
mines its place relative to the other rules. The indices start at 1. If no index position is speci-
fied, the rule is placed at the bottom of the list.
system dns [ search-domain domain_name position index | secondary-dns | server
no system dns [ search-domain domain_name position index | secondary-dns | server
ZoneRanger 5.5 User's Guide
v3 SNMP v3
user_name SNMP v3 user to use for this request
noAuthNoPriv No authentication and no privacy for this request
authNoPriv Authentication and no privacy for this request
authPriv Authentication and privacy for this request
auth_password Authentication password
priv_password Privacy password
oid Requested SNMP OID
port Port to which to make request (optional)
zr# snmpwalk router1 v1 public 1.3.6.1.2.1.1
Configure ZoneRanger DNS settings
Configure ZoneRanger host name list
Configure ZoneRanger ports
Configure ZoneRanger properties
Reboot ZoneRanger
Restart ZoneRanger software
Shutdown ZoneRanger
dns_server position index ]
dns_server position index ]
276