Tavve zoneranger User Manual page 285

Syntax Description
address
Usage Guidelines
Command to perform a network traceroute from the ZoneRanger to the specified device.
Example
This example shows how to traceroute device node1:
traffic
To configure the traffic configuration settings on the ZoneRanger.
configuration setting, use the no form of this command
traffic [ forwarded | interval | log-level | proxied]
no traffic [ forwarded | interval | log-level | proxied ]
Syntax Description
forwarded
interval
log-level
proxied
Usage Guidelines
Each of the traffic commands will take effect immediately when executed.
traffic forwarded [ all | per ] [ <cr> | notify [ <cr> [ [ total | generic | netflow | sflow | sys -
log | trap ] threshold ] ] ]
no traffic forwarded ...
ZoneRanger 5.5 User's Guide
Hostname or IP address to ping
zr# traceroute node1
Configure the forwarded traffic thresholds
Interval to check traffic thresholds ( in seconds)
Level of traffic logging on the ZoneRanger
Configure the proxied traffic thresholds
forwarded Configure forwarded threshold information for ZoneRanger
all All traffic
per Per IP address traffic
<cr> Enable threshold monitoring
notify Traffic notification and thresholds
<cr> Enable notification if threshold exceeded
total All traffic
To remove a traffic
.
285