Accessing Zoneranger Though The Ranger Gateway - Tavve zoneranger User Manual

F. Accessing ZoneRanger Though the Ranger Gateway
Some ZoneRanger ports and services may be accessed securely by proxy through the Ranger Gateway.
The Ranger Gateway assigns a set of TCP ports for each joined ZoneRanger for a particular set of
services (HTTP, HTTPS, SQL, SSH, and Telnet). The
on the Ranger Gateway Viewer display the port mapping for each joined ZoneRanger.
Using a Ranger Gateway to access a ZoneRanger web interface
By default, the ZoneRanger web interface is accessed using HTTP on port 80, or using HTTPS on
port 443. However, if those ports cannot be accessed because of security considerations, you can
access the ZoneRanger web interface through a Ranger Gateway. A Ranger Gateway provides proxy
access to the HTTP and HTTPS ports for each joined ZoneRanger.
For example, suppose the
20013 for a particular ZoneRanger. You would browse to one of the following URLs to access that
ZoneRanger's web interface through the Ranger Gateway:
http://RangerGatewayName:20012/
https://RangerGatewayName:20013/
These ports (in this case,
ZoneRanger are joined and will remain the same while the ZoneRanger and Ranger Gateway
remain joined. If they are unjoined and then joined later, the ports may change.
Using Ranger Gateway to access and query the ZoneRanger
database
The ZoneRanger maintains information in an SQL database about discovered devices. The Ranger
Gateway provides read-only access to the SQL database of each joined ZoneRanger. You can access
the database using any application that supports remote SQL database connections. The SQL
application you use would connect to the Ranger Gateway on the port that has been assigned to the
ZoneRanger whose database you are needing to access.
For example, suppose the
ZoneRanger. An SQL application could then access the ZoneRanger database by making SQL
queries to RangerGatewayName Port 20014.
The following additional information would also be needed in order to access the database:
Database Name:
Database User:
Database Password:
The Database password can be changed Configuration > Access Control page Passwords tab on
the ZoneRanger web interface.
This port (in this case,
and will remain the same while the ZoneRanger and Ranger Gateway remain joined. If they are
unjoined and then joined later, the port may change.
ZoneRanger 5.5 User's Guide
command returned HTTP port 20012 and the HTTPS port
listTcpPorts
and
20012 20013
command returned SQL port 20014 for a particular
listTcpPorts
rangerDb
ranger_ro
readonly
) is assigned when the Ranger Gateway and ZoneRanger are joined
20014
command and the Information tab
listTcpPorts
) are assigned when the Ranger Gateway and
372