Tavve zoneranger User Manual page 243

Usage Guidelines
Once you are in the access control configuration submode, you can add any number of server
group entries using the group-entry clause. You may also add a single tacacs and/or radius
clause for this access control server group. If multiple tacacs or radius clauses are entered,
the last one will be used. Once you are in the access control server group configuration sub-
mode, the following configuration commands are available:
group-entry ranger_gateway access_host TACACS_Port RADIUS_Auth_Port
no group-entry ranger_gateway access_host TACACS_Port RADIUS_Auth_Port
group-entry
ranger_gateway
access_host
TACACS_Port
RADIUS_Auth_Port
RADIUS_Acct_Port
no
radius key radius_key
no radius key radius_key
radius
key
radius_key
no
tacacs [ insert-ip | key tacacs_key ]
no tacacs [ insert-ip | key tacacs_key ]
tacacs
insert-ip
key
ZoneRanger 5.5 User's Guide
•
cancel - Exit this mode without saving any changes
•
clear-group-entries – Clear all server group entries
•
exit – exit server group mode (saving changes)
•
group-entry – Add a server to this access control server group.
•
no – remove or use default settings
•
radius – RADIUS-specific server group settings
•
tacacs – TACACS+-specific server group settings
RADIUS_Acct_Port
RADIUS_Acct_Port
Adds RADIUS specific information to this server group
Specifies the RADIUS key.
RADIUS key to use in this server group
Deletes the RADIUS key
Adds TACACS+ specific information to this server group
Insert source address in rem_addr field of TACACS+ message
Specifies the TACACS+ key.
Adds an access control server to the group.
Hostname or IP address of a joined Ranger Gateway.
Hostname or IP address of access control server
TACACS+ port on this access control server
RADIUS authentication port on this server
RADIUS accounting port on this server
Deletes an access control server
243