Tavve zoneranger User Manual page 232

Figure 35-23. Gateway Settings..Traffic window Options
The Ranger Gateway has the ability to monitor the amount of traffic received from and proxied to
its joined ZoneRangers. The Traffic measurement interval defines how frequently the Ranger
Gateway will check if a threshold has been exceeded. The traffic rate is calculated as an average
over the measurement interval in seconds.
The Ranger Gateway monitors traffic in two categories. The Overall category is all of the traffic of
a particular type either received from or proxied to all joined ZoneRangers. The Per ZoneRanger
category is all of the traffic of a particular type either received from or proxied to an individual
ZoneRanger.
In order for the Ranger Gateway to log traffic, Traffic Logging must be set in the Gateway
Settings..Logging Window. If Traffic logging is set to Short, then Overall traffic will be logged. If
Traffic logging is set to Full, then Overall and Per ZoneRanger traffic will be logged.
ZoneRanger 5.5 User's Guide 232