Tavve zoneranger User Manual page 274

snmp user user_name authentication [ md5 | sha ] auth_password privacy [ des | aes128 |
aes192 | aes256 ] priv_password
no user user_name authentication [ md5 | sha ] auth_password privacy [ des | aes128 |
aes192 | aes256 ] priv_password
snmp v3-require proxy-requests
Examples
This example shows how to set the ZoneRanger SNMP agent settings:
ZoneRanger 5.5 User's Guide
ip_address_pattern IP address pattern to disallow ZoneRanger SNMP access
comm_string ZoneRanger SNMP community string
port Specify the port to which to make SNMP requests
port Port number used on the host for a SNMP request.
position Position to place manager rule (optional)
index Index position
no Delete SNMP management rule
user Configure SNMP v3 users
user_name SNMP v3 user name
authentication SNMP v3 authentication type
md5 Use MD5 authentication
sha Use SHA authentication
auth_password Authentication password (must be at least 8 characters)
privacy SNMP v3 privacy type.
des Use DES privacy
aes128 Use AES128 privacy
aes192 Use AES192 privacy
aes256 Use AES256 privacy
priv_password Privacy password (must be at least 8 characters)
no Delete SNMP user
v3-require Configure whether or not SNMPv3 users are required
proxy-requests Require that SNMPv3 users be configured in order to proxy any
SNMPv3 requests
no Do not require SNMPv3 users.
zr# snmp agent community new_community
274