Tavve zoneranger User Manual page 297

snmp_proxy_log
snmp_proxy_mode
snmp_proxy_port
snmp_proxy_port_enabled
snmp_proxy_timeout
socks_server_port
socks_server_port_enabled
ssh_proxy_dest_port
ssh_proxy_port
ssh_proxy_port_enabled
syslog_forward_log
tacacs_proxy_log
tacacs_proxy_spoof
tcp_proxy_log
tcp_inbound_proxy_log
tcp_inbound_proxy_spoof
tftp_proxy_log
ZoneRanger 5.5 User's Guide
Level of logging for generic UDP
forwarding - values: none,
short, full
Format that applications use to
specify the SNMP community
string when making SNMP proxy
requests via the SNMP Proxy
port.
Port on which the Ranger Gateway
listens for SNMP proxy requests.
The default is 4852.
Whether or not the
snmp_proxy_port should be
available on the Ranger Gateway
Amount of time, in seconds, the
Ranger Gateway waits for a
response to an SNMP proxy
request.
Port on which Ranger Gateway
listens for SOCKS requests
Whether or not, the Ranger
Gateway will listen for
server requests
Port on ZoneRanger managed
devices to which an SSH proxy
session should be established
when using ssh_proxy_port.
Port on which Ranger Gateway
listens for SSH Proxy requests.
The default is 4822
Whether or not, the Ranger
Gateway will listen for
proxy requests
Level of logging for syslog
forwarding - values: none,
short, full
Level of logging for TACACS+
proxy - values: none, short,
full
Whether or not the source
address in the TACACS+ client
requests is the source address
of the original sending device
managed by the ZoneRanger or the
address of the Ranger Gateway.
Level of logging for TCP proxy -
values: none, short, full
Level of inbound logging for TCP
proxy - values: none, short,
full
Whether or not the inbound
source address in the TCP client
requests is the source address
of the original sending device
managed by the ZoneRanger or the
address of the Ranger Gateway.
Level of logging for TFTP proxy
- values: none, short, full
SOCKS
SSH
297