Tavve zoneranger User Manual page 171

Configuring SNMPv3 Users
Figure 34-56. Configuration > SNMP page Users tab
In order to validate communications with SNMPv3 agents, ZoneRanger must be configured
with a set of SNMPv3 Users. The Configuration > SNMP page Users tab is used to manage
SNMPv3 users.
The SNMPv3 Users section is the set of entries each of which contains the following:
Setting
User
Security Level
Auth Protocol
Auth Password
Privacy
Protocol
Privacy
Password
Context Name
Note: All user names must be unique, and all passwords must contain at least eight characters.
Using the SNMP Access Test
The Configuration > SNMP page Access Test tab enables you to test different combinations of
SNMP versions, community string values, and user parameters on ZoneRanger devices.
ZoneRanger 5.5 User's Guide
Description
SNMPv3 user name
noAuthNoPriv; authentication and privacy
(encryption) are not applied. authNoPriv;
only authentication is applied. authPriv;
authentication and privacy are applied.
Authentication protocol
Authentication password used if
authentication is applied.
Encryption Protocol
Encryption password used if privacy is
applied.
SNMPv3 context name to use with this
user. This field is optional.
171