Tavve zoneranger User Manual page 298

tftp_proxy_read_dir
tftp_proxy_write_dir
trap_forward_log
udp_forward_spoof
displays the current value of the specified configuration item. If there is no current
-view
-change
config_item specifies the configuration item to change
new_value specifies the new value to use for this configuration item.
-default
configGateway
configLicenses
configLicenses [ list ] | [ load < filename> ] | [ export < filename> ]
displays the list of licenses loaded on this Ranger Gateway
list
load can be used to load a new set of licenses on the Ranger Gateway
filename
export
filename
configLicenses
Ranger Gateway. When loading a new set of licenses from the specified file, all of the current
licenses will be removed prior to loading the new licenses.
configSSL
configSSL [ -keystore key_file [ -keystorePassword kp_password ]
[ -keyEntryPassword ke_password ] ] | [ -pkcs12 pkcs_file
configSSL
Gateway and joined ZoneRangers. If
options list is displayed:
1. Install by PKCS #12
ZoneRanger 5.5 User's Guide
value specified, all configuration values are displayed.
changes the current value of the specified configuration item to new_value.
resets the specified configuration item back to its original value.
displays, changes, or resets the Ranger Gateway configuration.
specifies the path and filename of licenses to load.
can be used to export the current set of licenses on the Ranger Gateway
specifies the path and filename in which to store the current set of licenses.
can be used to list, load, or export the set of ZoneRanger VM licenses on this
[ -password password ] | [ -certificate cert_file [ -pem
pem_file ] [ -pemPassword password ] | [ -revert ]
can be used to install SSL certificates used for communication between the Ranger
Directory where TFTP files
should be read when proxying
files to ZoneRanger managed
devices
Directory where TFTP files
should be written when proxying
files from ZoneRanger managed
devices
Level of logging for trap
forwarding - values: none,
short, full
Whether or not the source
address in the UDP traffic is
the source address of the
original sending device managed
by the ZoneRanger or the address
of the Ranger Gateway.
is executed with no parameters, the following
configSSL
298