Tavve zoneranger User Manual page 221

Log Level
None
Short
Long
All log files are stored in the log directory under the base Ranger Gateway install directory.
Gateway Settings...NTP Proxy
The Gateway Settings...NTP Proxy window provides the configuration information for the
Ranger Gateway handling of NTP requests.
Figure 35-12. Gateway Settings .. NTP Proxy Window
The NTP Proxy window can be used to configure whether or not NTP client requests from
ZoneRanger managed devices, will be presented to the NTP server with the source address of the
Ranger Gateway or the source address of the ZoneRanger managed device.
When the Spoof NTP Client Requests checkbox is enabled, the source address in NTP requests
sent from the Ranger Gateway to the NTP server will be the source address of the original sending
device managed by the ZoneRanger. If the checkbox is disabled, the source address in these requests
will be the address of the Ranger Gateway.
Gateway Settings...Proxy Map
The Gateway Settings...Proxy Map window provides the mechanism to configure the Proxy Map
service on the Ranger Gateway. The Proxy Map service is described in detail in Chapter 16.
ZoneRanger 5.5 User's Guide
Description
No messages are logged
Only message headers are logged
Entire messages are logged
221