Tavve zoneranger User Manual page 257

Example
This example shows how to set an ICMP proxyig caching rule for addresses 10.1.10.* and se
the log level to full.
join
To set the join passcode for this ZoneRanger.
join passcode passcode
Syntax Description
passcode
passcode
Usage Guidelines
To set the passcode for this ZoneRanger..
Example
This example shows how to set the passcode:
message-system
To configure the access restrictions and SSL configuration of the ZoneRanger messaging system.
To remove a access restrictions and SSL configuration, use the no form of this command
message-system [ restricted-address | ssl ]
no message-system [ restricted-address | ssl ]
Syntax Description
restricted-address
ZoneRanger 5.5 User's Guide
log-level Configure logging level for ICMP proxy
none No logging (default)
short Basic information is logged
full Additional information is logged
no Delete ICMP proxy log level
zr# icmp cache rule 10.1.10.* positive-cache 30 seconds negative-cache 20
seconds
zr# icmp log-level full
Specifies the passcode
Passcode to use for this ZoneRanger
zr# join passcode passcode1
Configure the addresses to which ZoneRanger cannot initiate
communications
.
257