Tavve zoneranger User Manual page 219

Figure 35-10. Gateway Settings .. Inbound TCP Proxy Window
The Inbound TCP Proxy window can be used to configure whether or not TCP proxy requests
from the ZoneRanger managed devices, will be presented to the source address of the Ranger
Gateway or the source address of the ZoneRanger managed device.
When the Inbound TCP Proxy Spoof Enabled checkbox is enabled, the source address in TCP
proxy requests from ZoneRanger sent from the Ranger Gateway to an application will be the source
address of the original sending device managed by the ZoneRanger. If the checkbox is disabled, the
source address in these requests will be the address of the Ranger Gateway.
Gateway Settings...Logging
The Gateway Settings...Logging window provides the mechanism to manage the logging facilities
on the Ranger Gateway.
ZoneRanger 5.5 User's Guide 219