Tavve zoneranger User Manual page 167

Figure 34-53. Configuration > Root Cause page TCP tab
Configuring TCP Root Cause
ZoneRanger is automatically configured to determine the root cause of an TCP outage and
generate the associated SNMP Trap. ZoneRanger can also be configured to send an email after
determining the root cause of an outage. You can configure the following settings with respect
to root cause outages:
Setting
Description
Email Notification
Recipients
Email Return Address
Ranger Gateway for
sending Email
Notifications
The Ranger Gateway sends its email destination to the configured mail server. The Send Test
Email button can be used to verify that the configuration parameters are correct.
The Show Advanced Options button can be used to specify the actions that ZoneRanger takes
to verify the status of a TCP port. After verification, ZoneRanger generates a trap and sends
notification emails.
Setting
Down Verify
Pools
Down Verify
Time
ZoneRanger 5.5 User's Guide
Description
Description to be used as the subject
in trap notifications
Email addresses for those who receive
email notifications. Use commas or
semicolons to separate multiple
addresses
"Reply-To" address for email
notifications. Use an address that
helps you to identify the reporting
ZoneRanger, such as
Note: The domain in this address
cannot be localhost , which Ranger
Gateway does not recognize.
Ranger Gateway though which to
forward email. If no Ranger Gateway
is selected, the ZoneRanger sends the
notifications.
Description
Number of times that a TCP port is polled
before it is considered to be down
Number of seconds during which a TCP port
is polled before it is considered to be
down
.
ZoneRanger1@dmz1
167