Tavve zoneranger User Manual page 283

Table of Contents

Advertisement

tftp snmp-triggered-rules timeout
no tftp snmp-triggered-rules timeout
Examples
This example shows how to add a TFTP proxy rule to allow 10.1.1.1 to read and write TFTP
files through Ranger Gateway gateway1 to a TFTP server tftpserver on port 69.
time
To configure the time setting on the ZoneRanger itself. To remove a time setting, use the no form
of this command
time [ gateway | ntp | time-protocol ]
no time [ gateway | ntp | time-protocol ]
Syntax Description
gateway
ntp
time-protocol
Usage Guidelines
Each of the time commands will take effect immediately when executed. The gateway and
time-protocol clauses may cause the ZoneRanger software to restart.
time gateway ranger_gateway
no time gateway ranger_gateway
ZoneRanger 5.5 User's Guide
position
Position to place TFTP proxy rule (optional)
index
Index position of rule starting at 1
no
Delete TFTP proxy rule
snmp-triggered-rules
timeout
no
zr# tftp proxy-rule 10.1.1.1 read write to gateway1 tftpserver 69
.
Retrieve time from Ranger Gateway. May cause restart.
Retrieve time from an NTP server.
Retrieve time from server supporting RFC 868. May cause restart.
gateway
Retrieve time from a joined Ranger Gateway
ranger_gateway Joined Ranger Gateway from which to retrieve time
no
Disables retrieving time from a Ranger Gateway
Enable or disable SNMP triggered TFTP proxy
Length of time in seconds a temporary rules exists
Disable SNMP triggered TFTP proxy
283

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents