Tavve zoneranger User Manual page 259

node group group_name
no node group group_name
Syntax Description
group_name
Usage Guidelines
Once you are in the node group configuration submode, you can add any number of node
group entries using the group-entry clause. Once you are in the node group configuration
submode, the following configuration commands are available:
group-entry ip_address_pattern
no group-entry ip_address_pattern
group-entry
ip_address_pattern
no
Example
This example shows how to create a node group:
ntp
To configure the NTP proxy settings for this ZoneRanger and its managed devices. To remove a
NTP proxy setting, use the no form of this command
ntp [ client-timeout | key | log-level | proxy-server | server-timeout |
authentication ]
no ntp [ client-timeout | key | log-level | proxy-server | server-timeout |
ZoneRanger 5.5 User's Guide
Name of the Node Group.
•
cancel - Exit this mode without saving any changes
•
clear-group-entries – Clear all node group entries
•
exit – exit server group mode (saving changes)
•
group-entry – Add an IP address pattern to this node group.
•
list – List the server in this node group
•
no – remove or use default settings
zr# node group ngroup
zr(node-group)# group-entry 10.1.1.*
zr(node-group)# group-entry @anotherNodeGroup
zr(node-group)# exit
validate-authentication ]
Adds an ip address pattern to the group.
IP address pattern or another node group (prefix @).
Deletes an access control server
.
validate-
259